News
Why Use Isopropyl Alcohol (IPA) in 3D Printing
When just starting out with a resin 3D printer, it is important to be well-informed, not only about the various options available, but also about the tools needed to optimize prints. From material selection to practical advice, our site has…
- 3 min read
- News
- Six more stories
When just starting out with a resin 3D printer, it is important to be well-informed, not only about the various options available, but also about the tools needed to optimize prints. From material selection to practical advice, our site has a wealth of articles to help you every step of the way, from model design to post-processing.
Today, we would like to highlight a key element: isopropyl alcohol. Used by professionals and beginners alike, this ally plays an essential role in 3D printer maintenance and print cleaning. Let’s take a look at its characteristics, advantages and limitations.
What Is Isopropyl Alcohol and What Is It Used For?
Isopropanol, or isopropyl alcohol (IPA), with the chemical formula (CH3)2CHOH, is a transparent liquid that evaporates rapidly without leaving any trace. It is made from acetone or propylene treated with sulfuric acid.
More from the desk
Six other notes from the rest of the bench.
NewsResearchers develop 3D printing method for milkAdditive manufacturing has infiltrated almost all industries, including food! In fact, 3D printed food was first studied by NASA in 2006: the space organization was researching how to feed astronauts during longer space missions. Fourteen years later, researchers are still&hellip
NewsWhat to Expect at Formnext 2023?Formnext 2023 is just around the corner! With the largest additive manufacturing conference in Europe opening its doors on Tuesday, November 7th and running through Friday, November 10th, it is safe to say that the entire 3D printing community is…
MaterialsCastable Wax 40 Resin: the new resin from FormlabsFormlabs has added a 30th patented material to its catalog! During the Consumer Electronic Show (CES) in Las Vegas, which took place virtually this year, the American manufacturer presented its new resin intended for jewelers: the Castable Wax 40 Resin. To develop…
Applications3D Printing Breathes Life Into Audi Car Seat DesignIt is undeniable that the use of additive manufacturing in the automotive industry is gaining in popularity. When talking about cars, we generally tend to give a lot of attention to the engine, horsepower and exterior design of vehicles, but…
ApplicationsMeet CoroNaspresso, the COVID-19 Test in a Coffee CapsuleTesting for COVID-19 with a coffee capsule and a pan? This is the original idea of a scientist from the University of Wageningen in the Netherlands. Hoping to reduce the cost of COVID-19 detection tests currently offered on the market,…
GuidesMONAD Studio: 3D Printing Musical InstrumentsWe were lucky enough to sit down with Monad Studio recently to discuss their recent developments. Monad Studio have created some of the most beautiful, 3D printed instruments we have ever seen. These include instruments used by Viktoria Modesta and more,…